Harris Corporation inventory from Office1000.com

Wait! There's more Harris Corporation You're on page 2 of 3. Select page: 1 -- 2 -- 3 --

Harris Corporation

D914 Handle w/66 & M110 Blades

• For professionals who need consistent, high quality wire terminations
• D914 Impact Tool with 3XEverSharp 66 & 110 Blades
• Hook trace and pick wires
• Tool Operation, use tool to properly set, seat and/or terminate wire. When tool punches down on wire a loud pop will indicate wire is properly seated.
• Warranty: Lifetime warranty
• Tested to perform 1 million terminations
• Uses a wide variety of blades
• Adjustable impact force
• Stays sharper 3X Longer than other blades
• Blade storage in handle
• Cleanest connections
• Maximum durability
• Certifiable terminations punch after punch

  Free Shipping  

HC10051120 - HC5 - (UPC: ) D914 Handle w/66 & M110 Blades (HC-10051-120)
$117.97 (EA)
 

• View Cart/Checkout HC10051120HC5
Listed in: * Phone: Tools * Telephone: Tools

Harris Corporation

D814 Handle with 66 and M110 Blades

• D814 Impact Tool, 3X EverSharp 66 & 110 Blades
• For professionals who need consistent, high quality wire terminations
• Harris impact tools are the professionals' choice and consistently achieve the highest possible certification on network installations the first time
• Quality terminations mean quality installations, every time
• Tool Operation, use tool to properly set, seat and/or terminate wire
• When tool punches down on wire a loud pop will indicate wire is properly seated

• Lifetime warranty
• Adjustable impact force
• Uses a wide variety of blades
• Blade storage in handle

• Stays sharper 3X Longer than other blades
• Maximum durability
• Cleanest connections
• Certifiable terminations punch after punch

  Free Shipping with $100 min order  

HC10055200 - HC5 - (UPC: ) D814 Handle w/66 & M110 Blades (HC-10055-200) $72.47 (EA)

• View Cart/Checkout HC10055200HC5
Listed in: * Phone: Tools * Telephone: Tools

Harris Corporation

Harris Impact 66 Punch Blade

• 66 Blade
• For D914 & D814
• Use with any impact tool
• Reversible for terminating or cutting wire on 66 blocks
• All other industry standard blades available from Harris

  Free Shipping with $100 min order  

HC10056000 - HC5 - (UPC: ) 66 Punch Blade for D914 & D814 (HC-10056-000) $29.47 [4+ $ 28.00] (not available)

• View Cart/Checkout HC10056000HC5

Harris Corporation

HC10061501 - HC5 - (UPC: ) D914S W/66/M110 & Free Blade (HC-10061-501)
$94.47 (not available)
 

• View Cart/Checkout HC10061501HC5

Harris Corporation

Harris Impact 110 Punch Blade

• 110 Blade
• For D914 & D814
• Use with any impact tool
• Reversible for terminating or cutting wire on 110 blocks
• All other industry standard blades available from Harris

  Free Shipping with $100 min order  

HC10176000 - HC5 - (UPC: ) 110 Punch Blade for D914 & D81 (HC-10176-000) $29.47 [4+ $ 28.00]

• View Cart/Checkout HC10176000HC5

Harris Corporation

"Mod Adapt Cords 4/6W;6""; 5pk"

• Replace broken clips without discarding the entire unit.

  Free Shipping with $100 min order  

HC10200000 - HC5 - (UPC: ) Mod Adapt Cords 4/6W;6"; 5pk (HC-10200-000) $19.97 (EA) [6+ $ 18.93/(EA)]

• View Cart/Checkout HC10200000HC5
Listed in: * Phone: Blocks * Telephone: Blocks

Harris Corporation

In Line Adapter 6/DTCH Cord

  Free Shipping with $100 min order  

HC10220100 - HC5 - (UPC: ) BANJO In-Line Adapter (HC-10220-100) $32.47 (EA) [4+ $ 30.79/(EA)]

• View Cart/Checkout HC10220100HC5
Listed in: * Phone: Tools * Telephone: Tools

Harris Corporation

Banjo In Line Adaptor

• 8 conductors

  Free Shipping with $100 min order  

HC10230100 - HC5 - (UPC: ) Banjo in line adapter -8 con. (HC-10230-100) $38.77 [4+ $ 36.02]

• View Cart/Checkout HC10230100HC5

Harris Corporation

Harris Modular Crimper

• Crimps AWG telephone and data cables
• Crimps 4 & 6 position RJ11, 4 & 6 position RJ12, 8 position RJ45
• Embedded flat cable cutter and stripper
• All in one modular crimping tool for precision crimping of phone or data plugs
• All in one crimping tool for Western Electric (WE)/Stewart Stamping (SS) type, 6 and 8 position modular telephone plugs
• Ratchet controlled to master the tension of the tool for ease of use
• Premium black oxide finish resists rusting
• Embedded flat cable cutter and stripper

• 1) To cut and strip 4 and 6 conductor flat cable, insert the cable into the slot labeled 6MM. Squeeze the handles to close the blades and cut the cable
• 2) Rest the cut cable end on the inside ridge for 6MM. Squeeze the handles to close the stripping blades and pull the cable out to strip the outer insulation
• 3) For 8 conductor cables, perform step 1 using the 12MM slot position
• 4) Assemble cable according to the connector manufacturer's instructions and according to the required pin out
• 5) Install the connector/cable assembly with the key tab facing upward into the required 4 pin, 6 pin, or 8 pin crimp. Squeeze the handles to ratchet and crimp

  Free Shipping with $100 min order  

HC11212530 - HC5 - (UPC: ) Mod Crimper (RJ11;RJ45;WE/SS S (HC-11212-530) $56.47 (EA) [4+ $ 52.46/(EA)]

• View Cart/Checkout HC11212530HC5
Listed in: * Phone: Tools * Telephone: Tools

Harris Corporation

Harris Electrical Contractor Telecom Kit

• Soft Case
• Kit includes one of each of the following:
• Modular Adapter
• Impact Tool
• Cable Stripper
• 66/110 cut blade
• D Snips
• TS30 Test set w/ ABN
• Probe Pic

  Free Shipping  

HC11290000 - HC5 - (UPC: ) Elec Contractors Telecom Kit (HC-11290-000) $329.00

• View Cart/Checkout HC11290000HC5

Harris Corporation

Harris PRO3000 Tone Generator And Probe Kit

• Works on virtually any cable or wire
• Requires one 9 volt battery in each product to operate (not included)
• Coax
• Cat 3/5/5e/6 etc.
• Security Wire
• Deenergized Electrical Wire
• Tones up to 10 miles on most cable
• Speaker Wire
• Durable nylon pouch with three pockets
• Kit for tracing and toning wire or cable
• PRO3000 Probe (Top Features)
• Extra large belt loop
• Easy to use adjustable volume control dial
• Loud speaker amplifies tone trhough walls, enclosure, wood or plaster
• FREE Spare Tip inside
• "Quick twist" tip for easy replacement
• SmartTone technology can generate five seperate tones
• PRO3000 Tone Generator (Top Features)
• Continuity testing
• External switch lets you select solid or alternating tone options, indicated with solid or flashing LEDs
• Line cord features Angled Bed of Nails clips and ruggedized RJ11 plug for direct access to phone and data jacks without adapters
• Line polarity confirmation

  Free Shipping with $100 min order  

HC26000900 - HC5 - (UPC: ) PRO 3000 Tone Generator with P (HC-26000-900) $89.97

• View Cart/Checkout HC26000900HC5
Listed in: * Phone: Tools * Telephone: Tools

Harris Corporation

HC30800009 - HC5 - (UPC: ) TS30 Butt Set; Angled Bed of N (HC-30800-009)
$245.00 (EA)
 

• View Cart/Checkout HC30800009HC5
Listed in: * Phone: Tools * Telephone: Tools

Harris Corporation

Can Wrench Hex Head

• Universal access to telephone boxes & pedestals. Opens telephone box fasteners and tightens nuts on binding post terminals.
• Harris Can Wrench
• oxidized 7/16" socket
• Ribbed handle design for more comfort, safety and greater torque power
• uced outside diameters for access to tight spaces
• Zinc-plated 3/8" socket
• 1 1/4" deep sockets for long binding posts

  Free Shipping with $100 min order  

HC44007000 - HC5 - (UPC: ) Can Wrench Hex Head (HC-44007-000) $17.97 (EA) [6+ $ 16.84/(EA)]

• View Cart/Checkout HC44007000HC5
Listed in: * Phone: Blocks * Telephone: Blocks

Harris Corporation

Probe Pic 105 Degree Angle

• Kynar insulated tip protects against shirting adjacent components
• Harris Probe Pic
• Use to spread apart wires for direct access
• Use to check for loose or damaged connections
• Use for picking one wire off of a flat surface
• Use for tracing or pulling wires from a bunch
• Clips to shirt pockets or tool pouch
• Protects both clothing and user

  Free Shipping with $100 min order  

HC44600000 - HC5 - (UPC: ) Probe Pic 105 Degree Angle (HC-44600-000) $8.47 (EA) [12+ $ 7.04/(EA)]

• View Cart/Checkout HC44600000HC5
Listed in: * Phone: Tools * Telephone: Tools

Harris Corporation

Harris Buttset

• DataSafe
• Angled Bed of Nails Clips
• Clip onto a line monitor mode without disrupting data traffic
• High Impedance Monitoring
• Warranty: 18 months
• Safety clip on to monitor and trouble shoot phone lines
• Audible ringer for callbacks
• Polarity indication: to identify polarity of the line
• For use with computerized voice response system
• Tone and Pulse operation
• Last number redial
• Speech signal levels compensated for loop length
• Replaceable heavy duty braided line cord
• Hearing aid compatible receiver
• Replaceable locking spring loaded belt clip

  Free Shipping  

HCTS19 - HC5 - (UPC: ) 19800-009 Buttset (HC-TS19) $158.47 (not available)

• View Cart/Checkout HCTS19HC5

Wait! There's more Harris Corporation You're on page 2 of 3. Select page: 1 -- 2 -- 3 --

UPSable orders qualify for free shipping when your order is $100 or more.